Wind sensor

From a post on /r/Arduino I had some ideas about how to make a simple wind sensor.

hallwindcombo

Tested one of the Hall sensors I have with a neodymium magnet I took out of an old CD-ROM. The particular Hall sensor in the breakout board is a 49E501BG. At first I tried another Hall sensor but the output from that one was almost digital, useless.

When I tested it I attached the magnet to the tip of a screwdriver and moved it around in all kinds of ways around the sensor. It gave nice clear readings from 300 with the magnet at its closest to 600 with no magnet or even 800 if the reverse side of the magnet was close.

Pingpong ball would give the wind more to drag on. A dampener (more rubber bands) would be good so that the magnet doesnt move too far away even in a full storm.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s